TM-FLEX R - Magnetic Print Surface for Resin Printers

Our TM-Flex R magnetic build plate system is the perfect balance of performance and value. Each kit comes with a custom cut, removable magnetic pad and a spring steel plate. This means you’ll get superior adhesion during printing and significantly smoother print removal once your print is finished. Our flex plate kits also come with custom designed tabs for easier plate installation and removal.

Manufacturers very rarely advertise machines with the build plate size. For example, the Creality LD-002R is advertised at 120x65 but the plate is 138x78! Be sure to measure! Our sizes listed are within 0.2mm of the plate size.

**Needs a Z Limit Switch Adapter (scroll down) 

Some plates are 1mm different than exact but will work as advertised. Since there are so many different manufacturers that can't agree on sizes, we've averaged measurements for some machines. 

Some machines like the Creality LD-002R can be adjusted with built in leveling screws but others cannot. If your machine has a swivel type build plate or does not have 2mm of vertical adjustment, the end stop will need to be triggered 2mm earlier. For optical end stops, the interrupter needs extended 2mm. 

For known machines that require Z limit switch adapters, see below:

• Anycubic Photon
• Anycubic Photon S
• Anycubic Photon Mono X
• Elegoo Mars/ Mars Pro
• Elegoo Mars Pro 2
• Elegoo Saturn
• Epax X1
• Kudo Bean
• NOVA3D Elfin
• Phrozen Transform

Included Items:

• 1 of TM-FLEX R Plate 
• 1 of Extra Hold Magnet
• 1 piece of sandpaper / red scotchbrite (depending on size)

To add a second plate, check that in the "Add-ons and Upgrades" section but please VERIFY that you are ordering the size you need. We will ship what is ordered. 

To see our Install and Use Guide, click HERE