Disclaimer about 3D Printing:
Building a 3d printer will require some physical dexterity and a little common sense. However, we cannot be responsible for your health and safety while building or operating the printer. With that in mind be sure you are confident with what you are doing before starting to build or buy from us. Tiny Machines will answer any questions you have before purchasing.
Building and operating involves electricity, so all necessary precautions should be taken and followed, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever be exposed to over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.
High temperatures are involved with 3D Printing. The Extrusion nozzle of the hot end runs at temperatures up to 250°C(482°C). The heated bed runs at temperatures up to 100°C (water boils at this temperature) and the melted plastic extruded will be around 200°C (400°F), so special care and attention should be made when handling these parts of the printer during operation.
Lastly, we wouldn't recommend leaving your printer running unattended. We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.